by MDT
SCN-RT2UP.01 Temperature relay actuator, double for PT1000 sensors
Original price
€126,40
-
Original price
€126,40
Original price
€126,40
€126,40
-
€126,40
Current price
€126,40
Type: UDC SCN-RT2UP.01 Temperature reluctor actuator, double for PT1000 sensors
EAN: 4251916111649
Bus System: KNX (TP)
Degree of protection: IP20
Mounting: Recessed
- For installation in a switch box
- The temperature is measured using external PT 1000 sensors
- Ideal for measuring outdoor temperature (eg s SCN-PTST3.01)
- Optional controller type (2-point, PI, PWM).
- The temperature is measured using separate KNX bus sensors
- Limity Min/Max
- Freeze / heat alarm
- Memory min./max
- Adjustable cyclic sending
- Day / night / frost / heat protection mode, cooling function
- State feedback through HVAC and RHCC state objects
- Change operating mode using bit / byte objects
- Target value specification through visualization, e.g. MDT VisuControl
- Integrated bus clutch
Number of measuring channels: 2
Temperature sensor: Connection for PT1000
Maximum temperature sensor cable length: 12 m (To avoid interference, the sensor cables must not be run in parallel with the 230 V AC supply cables.)
KNX interface specification: TP-256
Available KNX databases: ETS 3/4/5
Maximum cable cross-section: - KNX bus terminal: Ø 0.8 mm, solid conductor
Supply voltage: KNX bus (for 230 V lines in the vicinity, the applicable standards and guidelines on line spacing must be observed. Never install the device together with the 230 V cable in a flush-mounted box.)
Power consumption on the KNX bus: < 0,3 W
Temperature measuring range: -20 degrees Celsius to +100 degrees Celsius
Odhadovaná doba doručenia: 6 - 10 dní
