Motion sensor 210602 KNX Comfort
Type: Motion sensor 210602 KNX Comfort
EAN: 4010337084594
Presence detector (operating mode: presence detector), motion detection (operating mode: ceiling detector) or telegram message monitoring (operating mode: detector) indoors.
Ceiling mounting on fixed ceilings. Recessed device with integrated KNX bus coupling. Programming LED / button visible / functional after removing the decorative ring during installation. Controller for manual sensitivity correction. Snap-on cap to limit the detection area. Motion detection display (permanent or walk test only). Separate evaluation of three PIR sensors in the far range, each with a detection range of 120 degrees with overlap. Manual control with IR remote control 2115 00.
The sensitivity adjuster on the device can be deactivated using the software.
A maximum of 5 + 2 function blocks can be configured.
Function blocks of 1 to 5 with adjustable function: ceiling monitor, presence detector, operation signaling.
Function block 6: Presence detector with light control
Function block 7: Brightness sensor with limit value monitoring
Switching of function blocks, for example for day / night operation or weekly / weekend operation.
Function blocks 1 to 5: individual device, main unit, extension can be set.
Adjustable operating mode for one device, main unit: automatic, semi-automatic (manual ON / automatic off or automatic on / manual off).
Two outputs per function block (1 to 5) for ceiling monitor, presence detector function.
Functions ceiling monitor, output presence detector: switching, stair function, forced position switching, dimming value transmitter, light scene extension unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
Ceiling monitor, presence detector: Adjustable twilight level, twilight level via external communication object or via learning, additional transmission delay via external communication object, self-learning additional transmission delay (adaptive monitoring time), short-term presence function, twilight level feedback, blocking function , manual control by means of a push-button sensor (separate communication object), switch-off brightness (for presence detectors) by means of learning, measurement of the time period after the last movement
Presence detector function with light control: Combination with presence detector function block or stand-alone device, adjustable setpoint, setpoint specification via external communication object, setpoint shift via external communication object, learning function, effective setpoint feedback.
Brightness sensor function with limit value monitoring: configurable up to 3 limit values, switching functions, dimming value transmitter, light scene extension unit, adjustable hysteresis, limit value via external communication object or learning, blocking function.
The presence detector is not suitable for alarm messages in VdS-compatible alarm systems.
PIR sensors: 3 sensors (crossed beams), integrated brightness sensor
Mounting height: 2 to 5 m
Detection angle: 360 degrees
Nominal range
floor: approx. ø20 m (mounting height 3 m)
Nominal range
Table height: approx. ø12 m (mounting height 3 m)
Brightness: 10 to 2000 lux
Ambient temperature: -5 degrees C to +45 degrees C
Estimated delivery time: 6 - 10 days
