3-0004-007 KNX RF Multi radiator thermostat

Type: ISE 3-0004-007 KNX RF Multi radiator thermostat

The KNX RF Multi radiator thermostat is used to control radiator valves via KNX. The connection to the KNX installation and the transmission of KNX telegrams is carried out using the KNX RF Multi standard. The device is compatible with radiator valves with M30 x 1.5 mm thread.

Features:
- Manual operation or in KNX RF mode S
- Internal temperature sensor or measured values via a group object
- Boost function
- Battery status detection
- Four operating modes (comfort, standby mode, night mode, frost protection)
- Operating modes (summer/winter)
- Output of error messages (e.g. stuck valve)
- Configurable forced position
- Display of the desired value on the device
- Service mode is available
- Scenes can be configured individually
- Leader/follower dependencies allow grouping of several thermostats
- Output of group object "in operation" (Heartbeat).
- Automatic valve flushing to prevent calcification
- Configurable desired values for each mode and heating program
- Full KNX Secure support
- Long frame support
- Can be updated via KNX RF

Note: A KNX RF Multi/TP media coupler is required for integration into the KNX-TP system.

Rated voltage: Powered by 2 x AA batteries
Battery life: Up to two years
KNX communication: RF1.M (Multiple)
Frequency (KNX RF Multi): 868.3 MHz, 868.950 MHz, 869.525 MHz, 869.850 MHz
RF transmission power: max. 25 mW
Transmission range in free field: 100 m (typical)
Threaded connection: M30 x 1.5
Regulation range: 5 °C to +30 °C
Set power: max. 120 N
Ambient temperature: 0 °C to +50 °C
Type of protection: IP 20 (according to DIN EN 60529)
Receiver category: 2 (according to DIN EN 300220)
For ETS6.2 or higher

Link to manufacturer information