5174xxx KNX button with arrow symbols
(8-color versions)

Type: Gira 5174xxx KNX button with arrow symbols

- KNX pushbutton with integrated bus clutch
- Integrated temperature sensor
- Up to four functions can be controlled using the KNX button

Features:
- Switching, dimming, blinds, value transmitter, scene extension, 2-channel control and controller extension
- Switch: Command when pressed and / or released is adjustable (no response, on, off, toggle)
- Dimming: it is possible to set the command when pressing, the time between switching and dimming, dimming in different phases, repetition of the telegram after a long press and sending the telegram tracks at the end of pressing
- Blinds: Press command and control concept can be set
- The control concept can be adjusted at times for short and long operation and setting of the slats
- Value transmitter: It is possible to set the operating mode (1-byte and 2-byte value transmitter) and the value
- Scene extension: It is possible to set the operation mode (with or without memory function) and the scene number
- 2-channel operation: Up to two telegrams can be sent to KNX at the touch of a button
- the operating concept can be set and the time for short and long operation can be adjusted
- the operation of the channels can be set separately from each other

Status LED functions:
- Each status LED can be configured independently of the control panel
- Status LED functions: always off, always on, start display, telegram confirmation, status display, control via separate LED object, operating mode display, controller status display, presence status display and setpoint offset display
- Color can be parameterized. The color selection is performed either together for all status LEDs or separately for each device status LED. The status LEDs can be either red, green, or blue
- The brightness of the status LED can be set in five steps. By night reduction, the brightness of the status LED can be reduced at night using a communication object
- In addition, it is possible to set a different color and display type for each status LED

Driver extension features:
- External room temperature controllers can be controlled by extending the pushbutton function controller
- Operating mode switching, forced operating mode, presence function and setpoint shift
- Evaluation of the controller status using the status LED
- Measurement of the room temperature by an internal sensor or optionally by generating a measured value of the internally measured temperature with an outdoor temperature

Technical specifications:
KNX medium: TP256
KNX connection: Connection and branch terminal
Protection class: III
Installation depth: 15 mm
Ambient temperature: -5 to 50 degrees Celsius

Scope of delivery:
- KNX connection and branch terminal are included in the delivery
- Including support ring with screws

Tips:
- Compatible with KNX Data Secure
- Firmware updates are possible using the Gira ETS Service application (additional software).
- when using the Gira TX_44, use the IP20 adapter frame and the cover from System 55

Colors:

- Pure white glossy 5174 03, nocertain white semi-matt 5174 27, krhyme white glossy 5174 01, antracit 5174 28, hliníková 5174 26, nstainless steel 5174 600, smatte matte 5174 015, noblack matte 5174 005.

Link to manufacturer information

Estimated delivery time: 10 - 18 days