STC-0960.01 Power supply 960mA with diagnostic function
- Original price €239,92
- €239,92
Type: MDT STC-0960.01 Power supply 960mA with diagnostic function
EAN: 4251916100018
Bus System: KNX (TP)
Degree of protection: IP20
Mounting: DIN rail
The MDT KNX power supply with integrated choke supplies the KNX / EIB with a constant, stabilized DC voltage of 30 V DC. The integrated bus coupler with diagnostic function monitors the bus voltage, bus current, bus overload and mains voltage failure and mains voltage recovery. All events are stored in the internal memory with a time stamp. The memory can be read via a 14-byte telegram.
The current operating status is indicated by 8 colored LEDs at the top of the device:
- RUN (green LED): normal operation
- I> Imax (red LED): Overcurrent
- Reset (red LED: reset process is active
- Temperature alarm (red LED): excessive temperature
- Operation> 60% (red LED): KNX bus overload
- Bus error (red LED): Bus errors, telegram collisions and unconfirmed telegrams
- Missing device (red LED): Missing KNX device
- Program (red LED): programming mode
All devices are overload resistant and also have an output without a choke.
- KNX bus supply with integrated choke
- Supply voltage 230 V AC
- Short circuit resistance
- Safe against overload
- Supply voltage: 230 V AC / 50 Hz
- Output voltage: 30V DC
- Output voltage without choke: 30 V DC
- Rated current: 960mA
- Continuous current: 1280 mA
- Peak current: 1600 mA
- Maximum continuous total current of both outputs: 1300 mA (at higher sums of currents the red LED I> Imax lights up)
Efficiency at rated load type:> 87%
Idle power loss: < 1,0 W
KNX interface specification: TP-256
Available KNX databases: ETS 4/5
Maximum cable cross section:
- Screw end: 0.5 - 4.0 mm² fixed 0.5 - 2.5 mm² fine stranded
- KNX bus terminal: Ø 0.8 mm, solid conductor
Ambient temperature: 0 degrees Celsius to +45 degrees Celsius
Overvoltage category: III
