Cable KNX EIB YCYM 2x2x0,8 250m

Thanks to the increased test voltage and marking, this cable is particularly suitable for the transmission of BUS signals in building systems technology. Mainly for the European Installation Bus (EIB). The EIB BUS is available from the EIB under the NR. 1/39/92 and meets the requirements for bus cables in DIN VDE 0829 and EN 5009-2. EIB BUS lines HCHM can be laid on, in and under the plaster, in pipes and installation ducts, in dry, humid and wet rooms and outdoors - as long as they are protected from direct sunlight. It can be run next to the power line or touch it. Only one pair of wires (red / white) is required for the EIB fieldbus,
through which the 24V bus voltage and data telegrams are transmitted together. The second pair of wires is used as a reserve or for special purposes.

BUS line structure:
- Sheath color: copper, bare, solid
- Braided element: star four, pairs bound in layers
- common core shell: plastic foil
- Tensile stress: according to DIN VDE 0298 part 3
core insulation:
- Halogen-free compound insulation
- α-wire marking: 1. pair red, 2. white couple
- Identification of b-wire: 1. the pair is black, 2. the couple is yellow
Drainage wire: bare copper, solid
Shade: plastic laminated aluminum foil
Case color: green
Outer sheath: PVC compound YM1
Diameter: 6.5 mm

Technical specifications:
Rated voltage: 250V
Test voltage: 4KV
Conductor resistance: 73.2 ohms / km
Insulation resistance: min. 100 Mohm x km 
Operating capacity: maximum 800 nF / km at 800 Hz
Operating temperature: -40 to +70 degrees Celsius
Capacitive Connection: at 800Hz 300pF / 100m
Minimum laying temperature: +5 degrees Celsius
Maximum laying temperature: +70 degrees Celsius

Estimated delivery time: 6 - 14 days