217100 Switching / dimming module single 20-500 W / VA
Type: GIRA 217100 Switching / dimming module single 20-500 W / VA
EAN: 4010337082200
Bus System: KNX (TP)
Degree of protection: IP20
Construction: DIN sheets
Dimming drive with integrated bus clutch.
Switching and dimming of light bulbs, HV halogen lamps, dimmable HV-LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or NV-LED lamps, dimmable electronic transformers with LV halogen or NV-LED lamps.
Automatic or manual selection of the dimming principle according to the load. Resistant to inactivity, short circuit and excessive temperature. Manual control of outputs independently of the bus (possible operation on site).
The dimming actuator, 1-way, can also be used as a speed controller for speed control of single-phase electric motors. On-site operation: The outputs can only be controlled manually without bus voltage with operating voltage.
Central switching function for controlling all dimming channels.
Delay for actively transmitted feedback messages after bus voltage recovery.
Load type and dimming method can be configured: Universal (with automatic calibration procedure), electronic transformer / LV LED (capacitive / phase control principle), conventional transformer / LV LED (inductive / phase control principle), HV LED (phase control principle) or HV LED (phase control principle).
Feedback for "switching" and "brightness value". It is possible to adjust the range of dimmable brightness. Dimming behavior and dimming characteristics can be parameterized. The switch-on behavior for the relative dimming command can be parameterized. Automatic adjustment and scaling of the dimmable brightness range when using universal power amplifiers. The power of the dimming channel in the "OFF" state during the reception of the relative dimming command can be parameterized (switching and dimming or no response). Warning telegrams for short, overload and load fault. Feedback of the connected load type. For each output the block function or forced setting function.
Time functions (on / off delay, stair lighting function).
Stair lighting function with advance warning function by means of time-controlled dimming or activation of permanent lighting.
Possibility of connection and up to eight scenes per dimming channel.
Elapsed operating time meter for recording the switch-on time.
It is possible to set responses after a bus power failure and recovery.
Rated voltage: AC 110V to 230V 50 / 60Hz
Connected load (AC 230V):
20 to 500 W bulbs
20 to 500 W HV halogen
20 to 500 W LV halogen, Gira Tronic transformer
20 to 500 VA NV Transformer halogen winding
Switched motor current: 2.3 A
Load via screw terminals up to 4 mm2
VDE approval according to: EN 60669-1, EN 60669-2-1, EN 50428
Link to manufacturer information
Estimated delivery time: 6 - 10 days