201500 Dimming module 4-fold 4x225 W/VA

Typ: Gira 201500 Dimming module 4-fold 4x225 W/VA

EAN: 4010337073345

Bus System: KNX (TP)

Mounting: DIN rail

Functions in the Gira KNX system:
- Dimming module with integrated bus coupler.
- Switching and dimming of lamps, HV halogen lamps, dimmable HV-LED lamps, dimmable compact fluorescent lamps, dimmable induction transformers with LV halogen or LV-LED lamps, dimmable electronic transformers with LV halogen or LV-LED lamps.
- Automatic or manual selection of the dimming principle according to the load.
- Resistant to inactivity, short circuit and excessive temperature.
- Manual output control independent of the bus.
- It is possible to activate a temporary display of the status, connection through a communication object is possible through several action members.
- Expanding power with power boosters.
- To simplify the configuration, all existing dimming channels can be assigned to the same parameters in ETS, and therefore identically parameterized.
- Active transmission of feedback or status messages can be globally delayed after bus voltage recovery or after an ETS programming operation.


Dimming outputs:
- Independent switching and dimming of dimming outputs.
- It is possible to specify the type of load and define the dimming principle: Universal (with automatic calibration procedure), electronic transformer (capacitive/trailing edge), conventional transformer (inductive/rising edge), LED (rising edge) or LED (trailing edge).
- Characteristic dimming curve per channel configurable in time and value range to adapt to the respective connected load.
- Dimming range can be set: Brightness at power-on, basic brightness and upper dimming limit.
- It is possible to adjust the performance after receiving the absolute brightness value (dimming, brightening, fading).
- Performance during relative dimming in the off state can be set (channel on, no reaction).
- Switching feedback: Active (sent to the bus cyclically or when changing) or passive (the object can be read) feedback function.
- For each output it is possible to set the response to restore the bus voltage.
- The blocking function can be parameterized for each channel.
- Time functions (on delay, off delay).
- Staircase lighting function with pre-warning function through time-controlled reduction of lighting or activation of permanent lighting.
- Can be integrated into light scenes: Up to 16 internal scenes can be parameterized for one output.
- Scene loading delay time can be configured.
- Dimming power can be set when a new scene is called (brighten, dim, fade).
- Visual feedback when saving a scene.
- Brightness value feedback: Active (sends to the bus cyclically or when changing) or passive (the object can be read) feedback function.
- For active feedback objects, the update type can be set (when the input object changes or when the feedback value changes). This enables individual customization of visualizations.

Link to manufacturer information